Bring the elegant colour and appearance of stone in to your home with our unique range of stone effect paints.

Idea for creating stunning stone effects on feature walls, ceilings, doors, frames, banisters, lamps, tables, railings. The only limit is your imagination.

Made with ground stone for an authentic finish that looks and feel like stone

Quick drying & easy to apply
Hardwearing, long lasting and washable
The natural beauty of stone without the cost
Environmentally friendly - water based, low VOC.

Vinyl Interior Paint

$121.80

$121.80 per 25 Pounds

Please contact us to request the quotation (optional)

0/500

Quantity

The Qetesh`s Colour Chart makes it easy for you to find the right stone shade.

Each colour chart contains fifteen 30mm x 30mm stone colour swatches, and three 30mm x 30mm finish indicators to demonstrate both the colour and texture of our stone effect paints.

The Qetesh`s Colour Chart covers the following ranges: Fireplace Stone Coating, Garden Stone Coating, Interior Stone Coating, Kitchen & Bathroom, Miniature Stone Coating & Windowsill Stone Coating.
SUITABLE MATERIALS

Wood & Wood Finishes, Marble, Plaster, Masonry & Brickwork, Granite, MDF, Stone, Tiles, Resin, Concrete, Pre-Painted Surfaces

AVAILABLE SIZES

1L, 2.5L, 5L, 10L, 20L

APPLICATION METHOD

Brush, roller or spray. We recommend natural bristled economy paintbrushes for use with all Qetesh Paints.

CLEANING

Washable once cured. Clean brushes with water.

PROPERTIES

Drying Time: 2-3 hours in normal conditions.
Composition: Water-based & epoxy
Coverage: 7.5 meters squared per 1 litre.

Coverage can vary depending on the substrate.
SURFACE PREPARATION

Prepare all surfaces well. Ensure the surface is clean, sound and dry. Repair any damage with a suitable filler. The pre-painted and glossy surfaces. Apply at least one coat of Qetesh Primer & Undercoat.

BRUSH/ROLLER APPLICATION

Stir well before use. Apply using an economy natural bristled brush or a roller. Apply a MINIMUM of 3 even coats. Avoid overspreading. Leave 2-3 hours drying time between coats. Do not over brush/roll. If brush marks remain, finish with stippling before final coat dries.

SPRAY APPLICATION

Stir well before use. Apply 2-3 full and even coats to the surface. Wet film thickness should be between 300 and 500µm. Do not over coat on corners or joints. Allow 2-3 hours drying time between coats. Various psi settings can be used for a light or heavy finish (approx. 60psi for a medium textured finish). Nozzle size: 1.8-2.5mm (gravity fed gun) or 2-5mm (texture gun). Paint can be diluted using no more than 20% water.

APPLICATION TIPS

Apply a minimum of 3 coats
Use an economy natural bristled brush
Drying time can be reduced by circulating warm air around the painted surface

Vinyl Interior Paint

Colours & Finishes

Information

Appplication